Icom IC-F3000 SERIES Instruction Manual page 5

DO NOT
use or place the transceiver in direct sunlight or in areas
with temperatures below –30°C (+22°F) or above +60°C (+140°F).
The basic operations, transmission and reception of the transceiver
are guaranteed within the specified operating temperature range.
However, the LCD display may not be operate correctly, or show
an indication in the case of long hours of operation, or after being
placed in extremely cold areas.
DO NOT
modify the transceiver. The transceiver warranty does
not cover any problems caused by unauthorized modification.
DO NOT
use harsh solvents such as benzine or alcohol when
cleaning, as they will damage the transceiver surfaces.
the transceiver away from heavy rain, and never immerse
it in the water. The transceiver meets IP54* requirements for dust-
protection and splash resistance. However, once the transceiver
has been dropped, dust-protection and splash resistance cannot
be guaranteed because of possible damage to the transceiver's
case or the waterproof seal.
* Only when the battery pack and jack cover are attached.
to turn the transceiver power OFF before connect-
ing the supplied/optional equipment.
iv