Table of Contents
Advertisement
NOTE
• Simultaneous shooting with both cameras is not possible while either of the
cameras is recording a movie.
. Shooting with a Single Camera
You can use the operations below to shoot on either one of the cameras while
viewing images of both cameras on the Multi Image screen.
To shoot a snapshot
1.
Press the Camera 1 or Camera 2 shutter button.
This shoots a snapshot on the camera whose shutter button you pressed.
To shoot a movie
1.
Press the Camera 1 or Camera 2 [0] (Movie) button.
This starts movie recording on the camera whose button you pressed.
Press [0] (Movie) again to stop recording.
. Interval Shooting with Two Cameras
Use the procedure below to perform an Interval Shooting operation with two cameras.
1.
Touch "
".
This will displays the Interval Shooting setting screen.
2.
Configure Interval Shooting settings as desired, and then touch
"Start".
This applies the settings to both cameras and starts simultaneous Interval
Shooting with them.
• See page 44 for information about Interval Shooting.
NOTE
• Interval Shooting is automatically cancelled if either camera is unable to shoot for
some reason.
• Depending on the type of memory cards you are using and shooting conditions,
there may be some lag between the shooting operations of the two cameras. In
order to enable simultaneous shooting with two cameras, use of memory cards of
the same type that have been formatted on the cameras is recommended.
Using Two Cameras at the Same Time (Multi
93
Camera Mode)
Advertisement
Table of Contents
