Table of Contents
Advertisement
5.
Touch an item and then change its setting.
Interval
Shooting Style
6.
Touch "
" (Back).
7.
Touch "Start".
This starts the operation.
• Starting Interval Shooting operation causes the camera and controller to enter
a sleep state and standby for recording of the images. This will be indicated by
the camera's operation lamp flashing green. Note that the camera will not enter
the sleep state if "5 sec" is selected for the "Interval" setting.
• To recover from the sleep state, press any
controller button. Next, touching "
monitor screen will display the number of recorded
images. The maximum number of shots is 9,999.
Allows selection of one of the shooting intervals below.
5 sec, 15 sec, 30 sec, 1 min, 2 min
t³:
Shoots five snapshots followed by a five-second movie.
³ Only:
Shoots a five-second movie. Audio is also recorded with
this setting.
t Only: Shoots a snapshot.
• When "5 sec" is selected for the "Interval" setting, the
movie recording time is two seconds.
" on the
45
Recording Images
Advertisement
Table of Contents
