Table of Contents
Advertisement
Carabiner Strap
1.
Pass the carabiner strap belt around
the controller's carabiner strap
attachment bar.
2.
Pass the belt through the buckle to
secure it.
Pull on the belt until the belt flap is passed
all the way through the buckle.
3.
Hook the flap on the buckle.
4.
Pull on the carabiner and controller to confirm that
the flap is hooked on the buckle and is secure.
IMPORTANT!
• The carabiner strap is not intended for mountain climbing use. It is designed only to
support the camera.
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
18
flap
flap
Microphone
Lens
Quick Start Basics
Advertisement
Table of Contents
