Simrad MX610 Operator And Installation Manual page 37

MX61xJB PCB Terminals
SIMNET
TERMINATION
REMOTE
NMEA 0183 PORT
CONNECTOR TERMINALS
Mixed Mode
This feature allows position calculation using all available satellites
in view whether they have differential correction data or not. In
areas where beacon differential signal from land-based station or
SBAS is marginal and only partial satellite correction is available, it
may be useful to use the MIXED mode selection.
Reset Procedures
In order to access the RESET functionality, the following software
versions have to be in place:
• MX61x CDU - s/w version 1.0.42.235 (or newer),
• MX61xJB junction box - s/w version 1100 100121 (or newer)
How to RESET the Junction Box: (MX610JB & MX612JB)
1. Press the MENU key.
Scroll to Tools & Settings, press ENT.
2.
3. Scroll to NETWORK, press ENT.
4. Scroll to "NMEA Over MX61xJB", press ENT.
Scroll to either "Restore to Default" or "Power Reset", press ENT.
5.
6. Press the CLR key repeatedly or press any hot keys to exit.
MX612 with 12 Ports
Where:
• Power Reset - cycles the power to the junction box.
• Restore to default - restores baud rate of ports as per the table below.
System configuration | MX610/MX612 Operator and Installation manual
www.busse-yachtshop.de | info@busse-yachtshop.de
PORT1 PORT2
+ -
PORT3 PORT4 SUPPLY
MX610 with 4 Ports
MX521A
MX521B
RED
BLK
NEG
+12/24 VDC
Ext. RTCM
GRY
-
@4800 Baud
PRPL
+
YEL
WHT
BLU
BRN
ORG
GRN
| 37