Table of Contents
Advertisement
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to
avoid deformation caused by the heat radiation from the hob. Dimensions are shown below:
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
590
520
55
Under any circumstances, make sure the ceramic hob is well ventilated and the air inlet and outlet are not blocked.
Ensure the ceramic cooker hob is in good work state. As shown below
Note: The safety distance between the hob and the cupboard above the hob should be at least 760mm.
A(mm)
B(mm)
760
50 mini
51
564
494
C(mm)
20 mini
50 mini
D
E
Air intake
Air exit 5mm
14
Advertisement
Table of Contents
