Using your ceramic hob
To start cooking
•
After power on, the buzzer sounds once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the state of standby mode.
1. Touch the ON/OFF control
show "-"
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Select a heat setting by touching the
controls.
• If you don't choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
When you have finished cooking
1a. Turn the cooking zone off by scrolling down to "- "or touching
and
together.
all the indicators then
or
6