Table of Contents
Advertisement
PAPER CAPACITy - MUlTI-FOlDING UNIT
MX-FD10 Multi-folding Unit
MODeL
Type
Folding mode
Paper type
Tray capacity (located at the bottom
of the paper folding device)
PAPER CAPACITy - STACkER UNIT
MX-ST10 Large Capacity Stacker
MODeL
Type
Number of trays
Tray capacity
Offset
Stacking capacity
Paper-full detection
Stacking amount detection
Number of units connected in tandem
Recommended PaPeR
SuPPoRted PaPeR tyPeS
Sharp
MX-6500N/7500N Media Guide
Z-fold, 3-fold inside, 3-fold outside, 4-fold and 2-fold
3-fold inside
3-fold outside
4-fold
Z-fold
2-fold
Custom Size: Minimum 10.98" x 8.26"
Stacking tray
(Different paper types
cannot be mixed)
Custom Size: Maximum: 10.98" x 8.26"
Top tray
Top tray: Not available; Stacking tray: 5 levels - 0% / 25% / 50% / 75% / 100%
SuPPoRted PaPeR SizeS
© 2015 Sharp Electronics Corporation. All rights reserved.
MX-FD10
Multi-folding Unit (5 folding types)
Thin, plain, recycled, heavy or coated paper
Stacked up to 60mm (equivalent to 40 sheets)
Stacked up to 60mm (equivalent to 40 sheets)
Stacked up to 60mm (equivalent to 25 sheets)
Output in the tray of 100-sheet finisher
Output in the tray of 100-sheet finisher
MX-ST10
Large Capacity Stacker
2 trays - Top tray / Stacking tray (inside)
Top tray: 250 sheets (80 g/m
Stacking tray: 5,000 sheets (80 g/m
20mm (only stacking tray)
Comment
13" x 19", 12" x 18", 11" x 17",
8.5" x 14", 8.5" x 11", 8.5" x 11R"
(279mm x 210mm)
5.5" x 8.5R"
(279mm x 210mm)
Based on feedable paper sizes
and weights
Yes
2 units maximum can be connected
thRoughPut SPeedS
2
)
)
2
Paper Capacity
5,000 sheets (80 g/m
2,500 sheets (80 g/m
250 sheets (80 g/m
PaPeR caPacitieS
conveRSion chaRtS
)
2
)
2
)
2
3 5
Advertisement
Table of Contents
