Table of Contents
Advertisement
GbC PUNCH - SUPPORTED PAPER AND AND PUNCH TyPES
MX-GBCX2 Punch Unit
MODeL
Type
Transport rate
Supported paper weight
Supported paper size
Punching method
Punch type
(Paper: letter size)
Punchable paper weight
Maximum paper size
PlOCkMATIC bOOklET MAkER -
SUPPORTED PAPER AND STACk/STAPlE CAPACITy
MX-BM50 Booklet Maker System
Standard Paper Sizes
Paper Size (Minimum/Maximum)
Paper Weight (Minimum/Maximum)
Set Size (stapled, folded)
Set Size (non-stapled, folded)
Off-line Use Feature
Minimum Trimming
Maximum Trimming
Paper Weight (Minimum/Maximum)
Cover Feeder Capacity
Recommended PaPeR
SuPPoRted PaPeR tyPeS
Sharp
MX-6500N/7500N Media Guide
65/75 sheets/minute (based on MX-6500N/7500N models)
Minimum: 100mm x 148mm (3.93" x 5.82") / Maximum: 330mm x 488mm (13" x 19")
Available Punch Types: 44 holes: Color Coil die set; 21 holes: Wire 2:1 die set;
32 holes: Wire 3:1 die set; 11 holes: VeloBind die set; 32 holes: ProClick die set; 3 holes: 3 Hole die set;
MX-BM50 BaSe UNiT
Speed
MX-TM50 TRiMMeR UNiT
MX-CF50 COVeR FeeDeR
SuPPoRted PaPeR SizeS
© 2015 Sharp Electronics Corporation. All rights reserved.
MX-ST10
Floor standing
Through-pass Unit
55-300 g/m
(16 lb Bond- to 110 lb Cover)
2
Punch Unit
In-line system
5 holes: 5 Hole die set; 7 holes: 7 Hole die set
60-220 g/m
2
(16 lb Bond to 100 lb. Bristol)
Letter: 279mm x 216mm (11" x 8.5")
Based on MX-6500N/7500N engine speed
8.5" x 11", 8.5" x 14", 11" x 17", 12" x 18"
8.1" (W) x 10.8" (L) /12.6" (W) x 18" (L)
18 lb Bond /110 lb Cover
2 to 30 Sheets stapled (20 lb Bond)
18 lb Bond/140 lb Index
200 Sheets (20 lb Bond)
thRoughPut SPeedS
1 to 6 sheets
Standard
0.0394"
0.7"
PaPeR caPacitieS
conveRSion chaRtS
2 5
Advertisement
Table of Contents
