Umid Output And Display; Umid Output Settings; Umid Display - Sony J-10 Manual

5-2 UMID Output and Display

This section explains how to output and display
UMIDs.

5-2-1 UMID Output Settings

You can choose to output UMIDs or not from the SDI
or SDI (SUPER) output connector, and select either
Basic UMID or Extended UMID when you choose to
output UMIDs. Make these settings using extended
menu item 651, UMID OUTPUT.
See page 7-11 (GB) for more information about extended
menu item 651.

5-2-2 UMID Display

During playback, UMID data appears on the video
monitor by superimposition.
To display the UMID
Press the PLAY button while holding down the SHIFT
button.
To exit from UMID display
Press again the PLAY button while holding down the
SHIFT button.
UMID display on the video monitor
During playback in the Digital Betacam format
(J-30SDI) or in the MPEG IMX format (J-30/30SDI),
the video monitor connected to the COMPOSITE
(SUPER) output connector, SDI (SUPER) output
connector (for J-30SDI only) or DV connector
displays all UMID items at once as shown in the
following figure.
5-2
(GB) Chapter 5 UMID Functions
Instance Number Generation Method
1
Instance Number
2
Material Number Generation Method
3
4, 5 Material Number
Year/Month/Date
6
Hour:Minute:Second
7
Time Zone
8
GPS Altitude
9
Number of Satellites
0
Auxiliary Device
qa
(" ": not equiped, "+": equiped)
PDOP (Position Dilution Of Precision value)
qs
Longitude (E: east/W: west)
qd
Latitude (S: south/N: north)
qf
Organization Code
qg
User Code
qh
Country Code
qj