Sony J-10 Manual page 75

2 SET/MENU button
Use this button for setup menu operations and settings.
Press the SET/MENU button while holding down the
SHIFT button to display the contents of the setup
menu items on the FL display. When the setting is
finished, press only the SET/MENU button to fix the
settings and return to the normal display.
For details of setup menu settings and operations, see
Chapter 7.
3 AU MON SEL (audio monitor output select)/
1)
DOLBY C NR (noise reduction) button
Press this button to function the AU MON SEL button.
Each press of this button switches the audio channel as
listed below. The selected channels are displayed in
the display section.
For the Betacam/Betacam SP format
Output mode a) STEREO
Audio channel L
Press once CH-1
Press twice CH-1,2
Each press of this
Press 3 times
button switches the
Press 4 times
mode as in the
above sequence.
a) Set in basic menu item 026 of the setup menu
For the Betacam SX format
a)
Output mode STEREO
Audio channel L
Press once CH-1
Press twice CH-3
Press 3 times CH-1,2
Press 4 times CH-3,4
Press 5 times Each press of this
button switches the
Press 6 times
mode as in the
Press 7 times
above sequence.
a) Set in basic menu item 026 of the setup menu
..........................................................................................................................................................................................................
1) DOLBY C NR: Dolby C noise reduction manufactured
under license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
MONO
R L R
CH-2 CH-1 CH-1
CH-1,2 CH-2 CH-2
CH-1,2 CH-1,2
Each press of this
button switches the
mode as in the
above sequence.
MONO
R L R
CH-2 CH-1 CH-1
CH-4 CH-2 CH-2
CH-1,2 CH-3 CH-3
CH-3,4 CH-4 CH-4
CH-1,2 CH-1,2
CH-3,4 CH-3,4
Each press of this
button switches the
mode as in the
above sequence.
For the MPEG IMX format (J-30/30SDI)
a)
Output mode STEREO
Audio channel L
Press once CH-1
Press twice CH-3
Press 3 times CH-5
Press 4 times CH-7
Press 5 times CH-1,2
Press 6 times CH-3,4
Press 7 times CH-5,6
Press 8 times CH-7,8
Press 9 times Each press of this
button switches the
Press 10 times
mode as in the
Press 11 times
above sequence.
Press 12 times
Press 13 times
a) Set in basic menu item 026 of the setup menu
For the Digital Betacam format (J-30/30SDI)
a)
Output mode STEREO
Audio channel L
Press once CH-1
Press twice CH-3
Press 3 times CH-1,2
Press 4 times CH-3,4
Press 5 times CUE
Press 6 times Each press of this
button switches the
Press 7 times
mode as in the
Press 8 times
above sequence.
a) Set in basic menu item 026 of the setup menu
The latest setting for each format is saved in the
memory regardless of whether the power has been
turned on/off. Therefore, when you play any cassette
next time, it will be played back in the format last
saved. If there is no cassette in the unit, you can
change the audio channel in the format used the last
time you ejected the cassette.
Chapter 2 Location and Function of Parts
MONO
R L R
CH-2 CH-1 CH-1
CH-4 CH-2 CH-2
CH-6 CH-3 CH-3
CH-8 CH-4 CH-4
CH-1,2 CH-5 CH-5
CH-3,4 CH-6 CH-6
CH-5,6 CH-7 CH-7
CH-7,8 CH-8 CH-8
CH-1,2 CH-1,2
CH-3,4 CH-3,4
CH-5,6 CH-5,6
CH-7,8 CH-7,8
Each press of this
button switches the
mode as in the
above sequence.
MONO
R L R
CH-2 CH-1 CH-1
CH-4 CH-2 CH-2
CH-1,2 CH-3 CH-3
CH-3,4 CH-4 CH-4
CUE CUE CUE
CH-1,2 CH-1,2
CH-3,4 CH-3,4
Each press of this
button switches the
mode as in the
above sequence.
2-3
(GB)