Operating The Remote Commander - Sony J-10 Manual

4-3 Using the Remote Commander
2
Turn the JOG/SHUTTLE dial to change the setting
from "OFF" to "ON" while holding down the JOG/
SHUTTLE button, and then release the JOG/
SHUTTLE button.
Time data display area
Monitor screen
REMOTE INTERFACE
137
❉
213:WIRELESS-on
501
Items without ❉ are omitted.
(ON flashes while the JOG/SHUTTLE button is
being pressed.)
3
Press the SET/MENU button.
Time data display area and monitor go back to the
original views.
4-3-3 Operating the Remote
Commander
Press the function keys while pointing the infrared
transmitter of the Remote Commander at the remote
control detector.
Each key functions same as the corresponding key on
the control panel attached to the unit.
Note
For the SEARCH key,
is 10 times reverse speed.
4-8
(GB) Chapter 4 Playback
is 10 times forward speed,
This unit
Infrared transmitter
Note
When two or more units of J-10/10SDI/30/30SDI or
J-H1/H3 (J-H series of compact players) are placed
close to each other, the Remote Commander may
affect more than one unit. In this case, select OFF in
WIRELESS REMOTE CONTROL, extended menu
item 213, of the other units you do not want to operate.
Remote control detector
Remote
Commander