Cutting Roll Paper - Epson Stylus Photo R3000 User Manual

Epson Stylus Photo R3000
F
Attach the roll paper holder to the rear of the
printer.
G
Feed the roll paper into the roll paper feeder on
the rear of the printer until it stops.
After you have held the paper in place for about
three seconds, it will be loaded the printer
automatically.
Tip:
Open the printer cover and look down into the
printer to check that the paper is not being fed at a
slant.
User's Guide
Basic Operations

Cutting Roll Paper

Use scissors or other cutters to cut the print results from
the roll when printing is complete.
A
Choose whether to cut the paper after printing in
the control panel.
The following options are displayed.
Yes[Cons LCD]: Print a cut line and feed the
paper.
No[Cons LCD]: Return to the standby screen.
Select this option to continue printing on current
roll.
B
If you selected Yes[Cons LCD], cut the paper
along the cut line.
Further instructions are displayed in the control
panel's screen.
Tip:
To remove roll paper, confirm that Ready[Cons
LCD] is displayed in the control panel and press the
+ button for two seconds. The paper will be fed back
through the printer. Turn the knob on the roll paper
holder to take up the excess paper.
27