Epson Stylus Photo R3000
Basic Operations
Loading Cut Sheets
The method for loading cut sheets varies with the
thickness of the paper. Three methods are available. In
addition, the size of paper used varies with the loading
method.
Auto sheet feeder
Front manual feed (fine art
media)
Front manual feed (poster
board)
Note:
If the paper is wavy or curled, flatten the paper before
loading it in the printer, or use new paper. If wavy or
curled paper is loaded, this printer may not be able to
recognize the paper size, feed the paper, or print correctly.
We recommend that you return the paper to its original
package and store it flat, and take it out of the package
just before you use it.
Loading Paper into the Auto
Sheet Feeder
A
Turn on the printer.
User's Guide
Basic Operations
Paper thickness: 0.08 mm–
0.3 mm
Paper size: Varies with
paper type. See U
"Supported Media" on page
111.
Paper thickness: 0.3 mm–
0.7 mm
Paper size: A4, A3, A3+,
Letter
Paper thickness: 0.7 mm–
1.3 mm
Paper size: A3+
B
Open and fully extend the paper support.
C
Open the front cover.
21