Admin - D-Link DIR-830L User Manual

Section 3 - Configuration
This page will allow you to change the administrator (Admin) password and enable remote management.
From the Management menu on the bar on the top of the page, click Admin.
Password:
Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable
Enables a challenge-response test to require users to type letters or
Graphical numbers from a distorted image displayed on the screen to prevent
Authentication
online hackers and unauthorized users from gaining access to your
(CAPTCHA): router's network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means
Server: to connect to the router, you must enter https://192.168.0.1 instead
of http://192.168.0.1.
Enable Remote Remote management allows the DIR-830L to be configured from the
Management:
Internet by a web browser. A password is still required to access the web
management interface.
Remote Admin The port number used to access the DIR-830L is used in the URL.
Port: Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
of the DIR-830L and 8080 is the port used for the web management
interface. If you enable Use HTTPS, you must enter https:// as part of
the URL to access the router remotely.
Click Save when you are done.
To load, save, or reset settings, or reboot the router, click System and refer to page 69.
D-Link DIR-830L User Manual

Admin

68