Advanced; Qos Engine - D-Link DIR-830L User Manual

Section 3 - Configuration
This section lets you to prioritize specific clients, allowing those clients to receive higher bandwidth than others. For example, if one client is streaming
a movie and another is downloading a non-urgent file, you can assign the former device a higher priority than the latter so that the movie streaming
is not disrupted by the traffic of the other devices on the network.
From the Advanced menu on the bar on the top of the page, click QoS Engine.
Under All Devices, you will see device cards representing each connected client. If
some are off-screen, you can use the < and > buttons to scroll through the cards.
A maximum of one device can be assigned Highest priority.
A maximum of two devices can be assigned High priority.
A maximum of eight devices can be assigned Medium priority.
If devices are not explicitly assigned a priority, they will all be treated with equal
priority. If some devices are not assigned a priority and others are, the unassigned
devices will be treated with the lowest priority.
To assign a priority level to a device, drag the device card from the All Devices list over
an empty slot and release the mouse button. The card will remain in the slot. If you
want to remove a priority assignment from a device and return it to the All Devices
list, click the cross icon in the top right of the device card.
Click Save when you are done.
D-Link DIR-830L User Manual

Advanced

QoS Engine

54