D-Link DIR-830L User Manual page 41

Section 3 - Configuration
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs require you
to make some settings on your side before your router can connect to the IPv6 Internet.
DNS Type: Select either Obtain DNS server address automatically or Use
the following DNS address.
Primary DNS Server: If you selected Use the following DNS address above, enter the
primary DNS server address.
If you selected Use the following DNS address above, enter the
Secondary DNS Server:
secondary DNS server address.
Enable DHCP-PD:
Enable or disable prefix delegation services.
LAN IPv6 Address: If you disabled DHCP-PD, enter the LAN (local) IPv6 address for
the router.
LAN IPv6 Link-Local Displays the router's LAN link-local address.
Address:
Enable Automatic IPv6
Enable or disable the Automatic IPv6 Address Assignment feature.
Address Assignment:
Enable Automatic Enable or disable automatic DHCP-PD services.
DHCP-PD in LAN:
Select SLAAC + RDNSS or SLAAC + Stateless DHCP, Stateful
Auto Configuration
Type: (DHCPv6).
Router Advertisement
Enter the IPv6 address lifetime (in minutes).
Lifetime:
Click Save when you are done.
D-Link DIR-830L User Manual
Auto Configuration (SLAAC/DHCPv6)
37