Installation Requirements - Whirlpool AMD 093 User Manual

INSTALLATION REQUIREMENTS

Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions
provided with any tools listed here.
Tools needed
• Philips screwdrivers
• Saw
• Pencil
• Scissors
• Tape measure
• Cordless drill and ¹⁄₈" or smaller bit
Parts supplied
Check that all parts are included in package
containing parts.
Location Requirements
NOTES:
• The flexible exhaust hose allows placement of
the air conditioner between 23¹⁄₂" and 64" (60
cm and 163 cm) from window or door.
• Portable air conditioners are designed as
supplemental cooling to local areas within a
room.
• To ensure proper ventilation, keep the required
distance from the return air outlet to the wall or
other obstacles at least 23¹⁄₂" (60 cm).
• Do not block air outlet.
• Provide easy access to grounded outlet.
Electrical Requirements
• The portable air conditioner should be
connected to a 220-240V / 50Hz, 20-amp fused
grounded outlet.
• The use of a time-delay fuse or time-delay
circuit breaker is recommended.
• All wiring must comply with local and national
electrical regulations and be installed by a
qualified electrician. If you have any questions,
contact a qualified electrician.
Use your power supply cord:
Plug power supply cord into a grounded outlet.
NOTES:
• A damaged power supply cord must be replaced
with a new power supply cord obtained from
the product manufacturer and must not be
repaired.
Downloaded from AC-Manual.com Manuals
A
B
I
J
K
L
A. Foam seal
B. Flexible exhaust hose with adapters attached
C. ¹⁄₂" screws (4)
D. ³⁄₄" screws (4)
E.Window lock bracket
F. Rain cover
G. Outer window slider section
H. Inner window slider section
I. Nut(4)
J. Gasket(4)
K. Washer(4)
L. Bolt(4)
Vertical Slide Window
Horizontal Slide Window
29
C D
E
F
G
H