Installation Instructions - Whirlpool AMD 093 User Manual

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner
Remove packaging materials
• Remove and dispose of/recycle packaging
materials. Remove tape and glue residue from
surfaces before turning on the air conditioner.
Rub a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and dry.
• Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your air conditioner.
Install Portable Air Conditioner
Install Exhaust Hose and Adapter
1. Roll air conditioner to selected location. See
"Location Requirements."
2. Insert hose adapter into slot on the back of air
conditioner.
3. Slide down to lock hose into place.
Window Installation
Your window slider kit has been designed to fit
most standard vertical and horizontal window
applications. However, it may be necessary for you
to modify some aspects of the installation
procedures for certain types of windows.
1. Insert the window exhaust adapter into the
window slider kit.
2. Using 4 screws (provided), attach window
exhaust adapter to window slider kit.
3. Attach the rain cover with the two screws,
gaskets and nuts removed before.
NOTE: The holes in the window slider kit are
positioned for attaching the rain cover for vertical
installation or horizontal installation.
Downloaded from AC-Manual.com Manuals
A. Evaporator air intake
B. Hose adapter
C. Flexible exhaust hose
D.Window exhaust adapter
A. Screw locations
B. Window slider kit
C. Window exhaust adapter
30