Location Of Products Into Alcove - Right Product - Fisher & Paykel RS36W80 Installation Instructions Manual

Roll the right hinge product into the right hand side of the alcove until the product makes
1
contact with the joiner bracket.
IMPORTANT!
For flush installation: check for flushness of the product with the surrounding cabinetry
(refer to separate 'Installation instructions' booklet supplied with your appliance) on
how to achieve flushness.
Adjust the product height (refer to separate 'Installation instructions' booklet supplied with
2
your appliance).
Screw two M5 x 12 Socket head cap screws to connect the alcove bracket to the joiner
3
bracket (refer to A).
If the product is not flush, further loosen the top screws of the alcove attachment bracket
4
if required and move the bracket in a forward to back motion to suit (refer to B).
Recheck product flushness (refer to separate 'Installation instructions' booklet supplied
5
with your appliance). Once satisfied with flushness, tighten top screws fix an additional
#8 x 16 mush washer screw (refer to C).
6
8 LOCATION OF PRODUCTS INTO ALCOVE — RIGHT PRODUCT
A
B
SCALE 2:5
C
SCALE 2:5
SCALE 1:10