Location Of Products Into Alcove - Right Product - Fisher & Paykel ACTIVESMART Dual Installation Manual

Roll the right hinge refrigerator into the right hand side of the alcove until the refrigerator
1
makes contact with the joiner bracket.
IMPORTANT!
For flush installation: check for flushness of the refrigerator with the surrounding
cabinetry (refer to separate 'Installation guide' booklet supplied with your refrigerator)
on how to achieve flushness.
Adjust the refrigerator height (refer to separate 'Installation guide' booklet supplied with
2
your refrigerator).
Screw two M5 x 12 Socket head cap screws to connect the alcove bracket to the joiner
3
bracket (refer to A).
If the refrigerator is not flush, further loosen the top screws of the alcove attachment
4
bracket if required and move the bracket in a forward to back motion to suit (refer to B).
Recheck refrigerator flushness (refer to separate 'Installation guide' booklet supplied with
5
your refrigerator). Once satisfied with flushness, tighten top screws fix an additional
#8 x 16 mush washer screw (refer to C).
8
8 LOCATION OF PRODUCTS INTO ALCOVE — RIGHT PRODUCT
A
B
SCALE 2:5
C
SCALE 2:5
SCALE 1:10