Page 1
B100 gebruiksaanwijzing user manual betriebsanleitung mode d'emploi...
Page 2
Animo kan geen verantwoording op zich nemen voor eventuele fouten in dit boek of de gevolgen daarvan. All rights reserved. Animo has the right to change parts of the machine at any time without preceding or direct announcements to the client.
Page 3
B100 CONTENTS GENERAL DISCRIPTION .............. TECHNICAL SPECIFICATION ............OPERATION .................. CONNECTING THE B100 ............. PREPARATIONS BEFORE USE ........... CONTROL PANEL ................. MAKING COFFEE ................. DESCALING .................. BREAKDOWN ANALYSIS ............. 2015/04 Rev. 3.0...
CONNECTING THE B100 Before connecting the appliance, make sure that the available local voltage is the same as that shown on the type plate (fig. 4). The B100 is supplied with a plug fitting a 230V wall socket with rim earthing. Before connecting the appliance, first fill up the water heater with water (see 5.
0°C. • If all water has been removed from the B100 the instructions under ‘5. Preparations before use’ have to be followed again. • When the machine has to be opened for repairs or maintenance, the power supply must be disconnected.
Page 6
As soon as the B100 has cooled down, remove the lid (fig. 7A) from the reservoir and lift the blender (fig. 7B) from the water heater. The whole boiler will now be visible.
Need help?
Do you have a question about the B100 and is the answer not in the manual?
Questions and answers