TP-Link TL-WR810N User Manual page 75

Chapter 5
• Wireless Network Name
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
• Channel - This field determines which operating frequency will be used. The default
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Mode - Select the desired mode. It is strongly recommended that you keep the
default setting 11bgn
the router.
Note:
If 11bg mixed mode is selected, the
be changed.
• Channel Width - Select any channel width from the drop-down list. The default setting
is Auto, which can automatically adjust the channel width for your clients.
• Enable Wireless Radio
to allow or deny wireless access. If enabled, the wireless clients will be able to access
the router.
• Enable SSID Broadcast
name (SSID).
5. 5. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Wireless > Wireless
3. Configure the the security settings of your wireless network and click Save.
- Enter a string of up to 32 characters. The default SSID is
mixed, so that all 802.11b/g/n wireless devices can connect to
Channel Width field will turn grey and the value will become 20M and cannot
- The wireless radio of the router can be enabled or disabled
- If enabled, the router will broadcast the wireless network
Security.
Configure the Router in Access Point Mode
72