TP-Link TL-WR810N User Manual page 23

300mbps wi-fi pocket router/ap/tv adapter/repeater
Hide thumbs Also See for TL-WR810N:
Table of Contents

Advertisement

Chapter 4
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click
Renew
to renew the IP parameters from your ISP. Click
parameters.
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
Use These DNS Servers
Use These DNS Servers
the DNS servers will be assigned dynamically from your ISP.
Host Name
- This option specifies the name of the router.
Get IP with Unicast DHCP
applications. If you cannot get the IP address normally, you can choose this option. (It
is rarely required.)
Static IP
If your ISP provides a static or fixed IP address, subnet mask, default gateway and DNS
setting, please select
- If your ISP providess you one or two DNS addresses, select
and enter the primary and secondary addresses. Otherwise,
- A few ISPs' DHCP servers do not support the broadcast
Static
IP.
Configure the Router in Standard Wireless Router Mode
Dynamic
IP, and the router will
Release
to release the IP
20

Advertisement

Table of Contents
loading

Table of Contents