TP-Link TL-WR810N User Manual page 33

Chapter 4
• Encryption - Select Automatic,
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
• WPA /WPA2-Enterprise
• Version - Select Automatic,
• Encryption - Select Automatic,
• Radius Server IP
• Radius Port - Enter the port that Radius server used.
• Radius Password
• Group Key Update Period
The value should be 30 or above. Enter 0 to disable the update.
• WEP - It is based on the IEEE 802.11 standard.
• Type - The default setting is Automatic, which can select Shared Key or Open
System authentication type automatically based on the wireless client's
capability and request.
• WEP Key Format
Hexadecimal format stands for any combination of hexadecimal digits (0-9,
a-f, A-F) in the specified length. ASCII format stands for any combination of
keyboard characters in the specified length.
• WEP Key (Password)
matching WEP key. Make sure these values are identical on all wireless clients
in your network.
• Key Type - Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption.
Disabled means this WEP key entry is invalid.
• 64-bit - Enter 10 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 5 ASCII characters.
• 128-bit - Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 13 ASCII characters.
• 152-bit - Enter 32 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 16 ASCII characters.
4. 5. 3. Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
TKIP or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
WPA or WPA2.
TKIP or AES.
- Enter the IP address of the Radius server.
- Enter the password for the Radius server.
- Specify the group key update interval in seconds.
- Hexadecimal and ASCII formats are provided here.
- Select which of the four keys will be used and enter the
Configure the Router in Standard Wireless Router Mode
30