Pci Cage - HP proliant DL160SE G6 Maintenance And Service Manual

Figure 47
PCIX Riser Card Connector Location (the riser card for slot 1a and 1b)
•
Single-slot PCIe riser card (x16 and x4 link with X slot)

PCI cage

To remove the PCI cage:
NOTE: Disconnect all cables connecting an existing expansion board to the system board.
Loosen the four screws that secure the PCI cage to the system board tray.
1.
Lift the PCI cage away from the system board assembly.
2.
Figure 48
Removing the PCI Cage
Installing PCIe/PCI-X riser cards
The system supports up to two riser cards at a time. Use only HP supported expansion boards that
meet the following specifications:
Removal and replacement procedures 68