Connecting The Touch Display - 3M C3266PW User Manual

281

Connecting the Touch Display

C4267PW
C4667PW
C5567PW
Power
Switch
C3266PW
Power
Switch
Note: Please be warned that any change or modification to the equipment, not expressly
approved by the party responsible for compliance, could void your warranty.
To connect the Multi-Touch Chassis Display:
1. Turn off the computer before connecting or disconnecting the touch display.
AC Remote
OSD
Input
USB
Touch
Serial
AC
Touch
Input
USB
Touch
2. Select the appropriate video cable: Display Port, HDMI, DVI, or VGA. Connect one
end of the video cable to the video connector on the display. Connect the other end to
the video card in your computer.
3. Connect one end of the USB touch sensor cable to the LCD and the other end to an
available port on your computer. For the C3266PW display you also have the option
of connecting to the RS-232 Serial communication ports instead of the USB port.
Note: Do not connect both USB and Serial cables on the display. Choose one or the other.
4. Connect the power cable to an appropriate grounded power source.
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide
HDMI
RS-232 Port
OUT IN
Display
Port
HDMI
Port
RS-232
OUT IN
Display
Port
VGA
Port
DVI
Audio
Port
VGA
Port
Audio
DVI
Port