10
Multimedia Features
The Multi-Touch Chassis Display comes with built-in speakers and audio cables that may
be connected to the PC.
Testing the Multi-Touch Chassis Display
Note: The Multi-Touch Chassis Display has a power status light and video controls
located on the side of the display.
Make sure all cables are connected properly. Be sure to tighten all cable screws. Turn on
the power switch located on the back of the display.
To test the display:
5. Turn on your computer.
6. Make sure the video image is displayed. If not, check the LED to ensure that the
display is not in power save mode (amber).
7. Confirm the video image is centered within the viewing area. Use the display
controls to adjust, if necessary.
You can adjust the video controls to better suit your personal preference. For additional
details, refer to the Adjusting the Video Display later in this chapter.
VESA Mounting Option
Model
dimensions
C3266PW
C4267PW
C4667PW
C5567PW
VESA
Max
mounting
Screw
Length
(MM)
(MM)
200 X 200
10
400 X 400
16
400 X 400
16
400 X 400
16
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide
Weight
15 kg (33 lbs)
23 kg (50.7 lbs)
26 kg (57.3 lbs)
40 kg (88.2 lbs)
Hardware
Accessory Kit
X