Ricoh Aficio SP 100SF Service Manual page 233

First print
Printing resolution
Warm-up time (Ready status)
Paper Path Driver
1
AIO (All In One system*
Drum
Development
Charge
Toner supply
Used toner collection
Cleaning
Estimated yield
ID chip
Storage conditions
1
* The AIO cartridge contains the drum, charge unit, development unit, cleaning unit, and toner
supply unit. The unit is replaced as a whole; there are no serviceable parts inside.
• Less than 6.4 s from the start of paper feed until
paper exits.
• Less than 13 s from the time data is received until
paper exits.
600 x 600 dpi or 1200 x 600 dpi (selected with the
printer driver)
25 sec. (power on, energy save recovery)
at 23°C (71.6°F)
Single brush-less DC motor
) Replaceable cartridge
Optical photo-conductor
Dry electro-static method
Charge roller
Auger agitation, supply
Used toner collection container
Opposable cleaning blade
Based on A4 SEF Test Pattern
Starter AIO
Replacement AIO
See "Names and Distribution" in this section.
Temperature
Humidity
Note: Store away from direct sunlight.
Machine Specifications
500 sheets
ID chip model: 1200 sheets
Non-ID chip model: 2000
sheets
-30°C to 40°C
(-54°F to 104°F
15% to 80% rH
5