Ricoh Aficio SP 100SF Service Manual page 183

Toner End Option
Reset Settings
Printer Features
I/O Timeout
Stop Printing (default)/Continue Printing
• Stop Printing. The machine monitors the level of toner in the
AIO. When toner runs low, the machine issues the toner-
near end alert, and there is enough toner remaining to print
about 100 pages. When the toner runs out, the machine
issues the toner end alert and the machine will stop printing.
• Continue Printing. The machine will continue to print, even
after the AIO runs out of toner. The operators must replace
the AIO when they see the quality of the prints deteriorate.
Note
• When "Stop Printing" is selected the machine monitors the
toner level in the AIO, and you will see the toner end
progress bar on the first screen of the SOM.
• When "Continue Printing" is selected, the machine does not
monitor the toner level, you will see a blank progress bar
and two asterisks displayed at the right side.
Reset All Settings
[Execute], [Cancel]
Touching [Execute] restores all User Tool settings to their factory
defaults except:
• Language
• Date/Time
• Fax Speed Dial numbers registered
Touching [Cancel] rotates the menu to the previous level without
changing any settings.
Clear Address Book
[Execute], [Cancel]
Touching execute erases all destination numbers registered for
Fax Speed Dial. Touching [Cancel] rotates the menu to the
previous level without deleting anything.
Sets the length of time for the machine to wait for data from the
USB port before it issues an error.
Off, 15 sec., 60 sec., 300 sec.
Utilities
181