Ricoh Aficio SP 100SF Service Manual page 176

6. Troubleshooting
This button resets the count for the AIO (toner cartridge). This operation is the same as the
cartridge reset feature in the User Tools, with the following exceptions:
• The count for the cartridge can be reset only after the toner end message appears and a
new or re-filled cartridge has been inserted.
• With this setting, the count can be reset any time by the service technician.
Note
• Toner consumption is monitored by a dot count system managed by the engine
controller.
• The number of pages that can be printer between the toner low alert and toner end alert
is approximately 100 pages.
• After toner end occurs, approximately 50 pages can be force printed.
(11) Factory Default
The function clears all logs and returns all settings to their default settings. The settings that are
returned to their factory defaults include:
• Counters
• Error Log (SC codes)
• Print Log
• Fax TX/RX Log (M103)
• Image Data for Faxes (TX/RX) (M103)
• Report Images
• Fax Speed Dial List (M103)
• User Tool Settings (M103)
• Service Mode settings
• Fax Maintenance (fax-related service mode settings). (M103)
(12) CCD Main Zoom
Adjusts magnification in the horizontal direction, vertical relative to the direction of paper
feed (main scan direction)
[98 to 102/0.4% steps]
(13) CCD Sub Zoom
174
M102, M103
M102, M103