Ricoh Aficio SP 100SF Service Manual page 190

6. Troubleshooting
Report Print Set
Address Book
188
The operator enters the number to access and outside line if the
machine is connected via PBX. "PBX" must be selected for "PSTN/
PBX" above.
• Access Number: 9 (Default) Range: 3 digits (000-999)
Fax No. Confirmation
Switches fax number confirmation for direct sending on and off.
• Off. (Default) No confirmation required.
• On. When operator sends a fax using direct sending, a
message prompts them to enter the number again to confirm
the first number entered.
Note: This feature does not operate for direct or memory sending
using registered speed dial fax numbers, or manual re-dialing.
TX Status Report
Determines how status reports print for fax transmissions.
• Every TX with Image. (Default) A report prints after every
transmission with an image of the sent document.
• Error Only. A report print only after an error occurs during
transmission.
• Error: With Image. A report prints with an image of the
document only after an error occurs during transmission.
• Every TX. A report prints for every transmission.
• Every TX: With Image. A report prints with an image of the
document after every transmission.
• Do Not Print. A report never prints.
Fax Journal
Determines whether the fax journal prints automatically.
• Auto Print. (Default) A fax journal prints automatically after
every 100 fax jobs (sending and receiving).
• Do Not Auto Print. Fax journal never prints automatically.
This is the feature the operator uses to register fax numbers for
speed dialing.