Gold Medal Pop-O-Gold Instruction Manual page 9

Bag and Hose Connector Issues – There are two different types of dispensing nozzles employed on the
Bag-In-Box oils, as well as two different types of connectors installed on the oil pumping system hoses
which connect to the bag's dispensing nozzles. The particular combination of connectors in your system will
determine the appropriate method for connecting the Bag-In-Box oil bag to the system hosing. These
combinations will be illustrated and explained in the following section.
Bag Dispensing Nozzle – Blue Insert
Blue Insert Bag Nozzle with
Blue/White Hose Connector
1. With the blue collar on the hose
connector retracted toward
crosspiece, slide hose connector
shell onto bag nozzle.
4. Place fingers behind flange and
use thumbs to slide the crosspiece
forward into the nozzle. Oil flow is
initiated.
2. Holding the bag nozzle behind
the flange, slide the blue collar
forward to lock the hose connector
onto the bag nozzle.
White Insert Bag Nozzle with
Blue/White Hose Connector
1. With the blue collar on the hose
connector retracted toward
crosspiece, slide hose connector
shell onto bag nozzle.
9
Bag dispensing Nozzle – White Insert
3. Connector shown with shell
correctly engaged and collar
forward in lock position.
2. Holding the bag connector, slide
the blue collar forward to lock the
hose connector onto the bag
nozzle.
For models made after 12/04
Pop-O-Gold