Gold Medal Pop-O-Gold Instruction Manual page 10

3. Connector shown with shell
correctly engaged and collar
forward in lock position. Oil flow
commences. Do not slide
crosspiece forward.
3. Connector shown with shell
correctly engaged and plunger
forward in lock position. Oil flow
commences.
3. Connector shown with shell
correctly engaged and plunger
forward in lock position. Since the
White Insert Bag Nozzle is not
designed to work with the insert
pressed forward, this configuration
may or may not work. If it does
not, remove the gray hose
connector and order the blue hose
connector from Gold Medal.
Blue Insert Bag Nozzle
with Gray Hose Connector
1. Grasp the bag nozzle and slide
the gray hose connector on from
the side.
White Insert Bag Nozzle
with Gray Hose Connector
1. Grasp the bag nozzle and slide
the gray hose connector on from
the side.
NOTE: If the oil does not flow after engaging plunger on gray hose
connector, or if the crosspiece is inadvertently pushed forward when
using the blue hose connector with the white insert nozzle, the nozzle
center slider insert will be left pushed back into the bag, as shown
above left.
To correct this, place fingers behind nozzle as shown above
right. You will feel the center slider protruding slightly into the bag.
Holding the nozzle body from the front, press the slider from the back
side of the nozzle until it snaps outward into its correct position. The
nozzle is now ready to be used with a blue hose connector.
10
Pop-O-Gold
2. With the hose connector in
place, place fingers behind flange
on connector and press plunger
forward to lock.
2. With the hose connector in
place, place fingers behind flange
on connector and press plunger
forward to lock.
For models made after 12/04