Gold Medal Pop-O-Gold Instruction Manual page 28

Pop-O-Gold
Lid And Agitator Assy.
7.4 – Spur Gear
7.3 – Button Head Screw On
Top of Agitator Shaft
7.5 – Set Screw for Spur
Gear (2 ea. 10-32 x 3/16)
7.2 – Woodruff Key
(for Spur Gear)
7.6 – Set Collar (Same
above and below lid)
7.1 – Oil Funnel
7.7 – Set Screw for
Collar (1/4-20 x 3/16)
7.10 – Cross Bar
7.8 – Rear Lid
7.13 – Cross Bar
7.14 – Cross Bar
Fastener
Fastener
w/shoulder
7.9 – Front Lid
7.15 – Cross Bar
Bushing (2)
Required
7.11 – Agitator Weld Assembly
(comprising agitator shaft and
blades w/o gear, collars, or key)
7.12 – Also available for order as
a complete assembly, shown at
left in side view with lids lifted
and agitator blades visible.
Figure 7 – Lid and Agitator Assembly
28 For models made after 12/04