Related Manuals for Bartscher 165.510
Summary of Contents for Bartscher 165.510
- Page 1 INSTRUCTIONS FOR INSTALLATION AND USE INSTRUCTIONS FOR INSTALLATION AND USE FRYER FRYERS FE - 08 165.510 Date: 10 / 2010...
- Page 2 CONTENT DECLARATION OF A STANDARDS CONFORMITY INSTRUCTION FOR USE CLEANING AND MAINTENANCE...
-
Page 3: Technical Data
DECLARATION OF A STANDARDS CONFORMITY The producer confi rms that the devices agree with CEE 90/396 standards, rule nr. 22/1997 sb. and with relevant goverment orders. Instalation must be done with respect to valid standards. Attention, the producer refuses any responsibility in case of direct or indirect damages which are caused due to wrong instalation, incorrect intervention or modifi... - Page 4 TECHNICAL INSTRUCTIONS FOR INSTALATION AND REGULATION Can be used ONLY by specialized technicians. following instructions apply to the technician specialized in instalation to do all the operations in the most correct way and according to the valid standards. Important: Any activity connected with regulation etc. must be done only when the device is disconnected from electricity. If it is necessary to have the device connected to the electricity (during repairs) you must be very careful.
- Page 5 • safety fuse of the feeder and inner mains can stand the loading of the device (see label of the matrix) • mains are equipped with effective grounding according to standards (ČSN) and conditions given by law • socket or switch of the feed is well accessible from device We refuse any responsibility in case of not respecting above mentioned rules.
-
Page 6: Cleaning And Maintenance
CLEANING AND MAINTENANCE ATTENTION! The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from electricity. Always switch off the main feeder to the device. Stainless parts wash with moist cleaning cloth and detergent without groove parts than dry it by the cloth - mainly around the regulation knob, main switch, cable bushing, feeding cable, microswitch and fi...
Need help?
Do you have a question about the 165.510 and is the answer not in the manual?
Questions and answers