Restore A Saved Switch Configuration; Use Browser-Based Access To Restore A Saved Switch Configuration - NETGEAR ProSAFE GS105Ev2 User Manual

The Switch Status page displays.
6. Select System > Maintenance > Save Configuration.
The Save Configuration page displays.
7. Click the BROWSE button.
8. Select the location to save the configuration file (a .cfg file).
9. Click the APPLY button.
The switch configuration is saved.

Restore a Saved Switch Configuration

You can restore switch configuration that you saved.
Use Browser-Based Access to Restore a Saved Switch
Configuration
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Browser on page 7.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > Maintenance > Restore Configuration.
The Restore Configuration page displays.
6. Click the Browse button and locate and select the saved configuration file (a .cfg file).
7. Click the Apply button.
The saved configuration is restored to the switch.
ProSAFE Gigabit Web Managed (Plus) Switches
Manage and Monitor the Switch
69
Access the Switch Using a Web