Use The Prosafe Plus Utility To Enable Power Saving Mode - NETGEAR ProSAFE GS105Ev2 User Manual

6. Select the Enable button to enable the power saving mode.
By default, the Disable radio button is selected.
7. Click the Apply button.
Your settings are saved.

Use the ProSAFE Plus Utility to Enable Power Saving Mode


To enable the power saving options:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6. Select System > Management > Power Saving Mode.
The previous figure is an example. Your switch might provide other options.
7. Select the Enable radio button.
By default, the Disable radio button is selected.
8. Click the APPLY button.
Your settings are saved.
ProSAFE Gigabit Web Managed (Plus) Switches
Manage and Monitor the Switch
63