NETGEAR GS105Ev2 Installation Manual

Installation Guide
5-Port Gigabit Ethernet
Smart Managed Plus Switch
GS105Ev2
Package contents
• Switch
• Power adapter (varies by region)
• Wall-mount kit
• Installation guide
Ethernet cables not included
1. Register your switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com
2. Log in to your NETGEAR account.
If you do not have a free NETGEAR account, you can create one.
The My Products page displays.
3. From the menu on the left, select Register a Product.
4. In the Serial Number field, type the serial number of your device.
The serial number is 13 digits long. It is printed on the switch label.
5. From the Date of Purchase menu, select the date when you purchased the
device.
6. Click the REGISTER button.
The switch is registered with NETGEAR.
A confirmation email is sent to your NETGEAR account email address.
2. Connect the switch
GS105Ev2 switch
Laptop
Access point
Desktop computer
Sample connections
Server
This switch is designed for indoor use only. If you want to connect it to a device
located outdoors, the outdoor device must be properly grounded and surge pro-
tected, and you must install an Ethernet surge protector inline between the switch
and the outdoor device. Failure to do so can damage the switch.
WARNING: Before connecting the GS105Ev2 device to outdoor cables
or devices, see https://kb.netgear.com/000057103
information.
Internet
Router
Laptop
for safety and warranty