HP Integrity NonStop X NS7 Planning Manual page 15

IP or Telco CLIM Option 2 — Four 10GBase-SR and One 1GBase-T
Interface Characteristics of Gen8 IP or Telco CLIM
Slot 1 InfiniBand interface card which provides the IB fabric connections
Slot 2 10GbE 2-port adapter for Eth4 and Eth3 customer ports
Slot 3 1GbE 2-port adapter for Eth5 customer port and Eth0 for maintenance support.
FlexLOM 10GbE 2-port adapter for Eth2 and Eth1 customer ports
Interface Characteristics of Gen9 IP or Telco CLIM
Slot 1 InfiniBand interface card which provides the IB fabric connections
Slot 2 10GbE 2-port adapter for Eth1 and Eth2 customer ports
Slot 3 10GbE 2-port adapter for Eth3 and Eth4 customer ports
FlexLOM 1GbE 2-port adapter for Eth5 customer port and Eth0 for maintenance support
CLIM Cable Management Patch Panels
The HPE CLIM uses two Cable Management patch panels for RJ45 and LC (optical) connections.
The RJ45 patch panel is shown below. Both are preinstalled in new systems. For more information,
refer your service provider to the CLuster I/O (CLIM) Installation and Configuration Guide (15.02+).
NonStop X NS7 Standard and Optional Hardware 15