Frequently Asked Questions - Canon iPF680 User Manual

Frequently Asked Questions

Frequently Asked Questions
Frequently Asked Questions
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks
in the answer column.
Question
I want to easily create
vertical or horizontal ban-
ners.
Does this printer support
sub-ink tank system?
I want to know how to
configure roll cutting.
I want to configure so that
the roll is cut automatical-
ly after waiting for the ink
to dry.
How do I print without
borders?
I want to know the paper
types that can be used in
this printer.
The paper type that I
want to print is not dis-
played on the Display
Screen.
Can I perform duplex
printing?
I want to perform enlarge-
ment printing.
628
You can print originals that are in landscape (or portrait) orientation automatically enlarged to fit the roll
width. This is an easy way to create vertical or horizontal banners.
(See "Printing Vertical or Horizontal Banners (Large-Format Printing).")
This printer supports sub-ink tank system.
Even if an ink tank becomes empty during printing, since a certain amount of ink always is stored in a sub-
ink tank, you can replace the ink tank while printing.
(See "Replacing Ink Tanks.")
➔
You can select the cutting method by the setting of the printer driver and the setting of the printer.
To cut rolls automatically after printing, set Cutting Mode of the printer to Automatic and Automatic Cut-
ting of the printer driver to Yes.
When using paper for which ink adhesion takes time or the print surface is easily scratched, we recommend
that you set the Cutting Mode setting of the printer to Eject.
(See "Specifying the Cutting Method for Rolls.")
(See "Cutting Roll Paper After Printing.")
In the printer driver, you can set the time for waiting until the ink dries.
Also, you can set likewise on the printer.
(See "Specifying the Ink Drying Time for Rolls.")
(See "Menu Structure.")
P.452
➔
When printing on rolls, you can perform borderless printing by configuring the printer driver. (when printing
on cut sheets, you cannot perform borderless printing)
(See "Borderless Printing on Paper of Equivalent Size.")
(See "Borderless Printing by Resizing Originals to Fit the Roll Width.")
(See "Borderless Printing at Actual Size.")
Concerning the paper that can be used in this printer, refer to the imagePROGRAF home page or the Paper
Reference Guide.
(See "Displaying the Paper Reference Guide.")
When using newly released paper, paper information must be registered on the printer and the printer driver.
Download the new version of Media Information File from the imagePROGRAF website and install it.
(See "Updating paper information.")
This printer cannot perform duplex printing.
If you use the Folded Duplex function in the Free Layout of Windows software, you can print two pages
one-sided, fold them at the center and suspend them to substitute for duplex printing.
(See "Prints using Folded Duplex (Windows).")
With the printer driver, you can specify the ratio matching the document with the paper size and width and
perform enlargement printing or reduction printing.
(See "Resizing Originals to Match the Paper Size.")
(See "Resizing Originals to Fit the Roll Width.")
(See "Resizing Originals by Entering a Scaling Value.")
Answer
P.590
P.388
➔
P.152
➔
P.385
➔
P.87
➔
P.80
➔
P.365
➔
P.368
➔
P.224
➔
P.65
➔
P.67
➔
P.71
➔
iPF685
P.97
➔
P.90
➔
User's Guide