Canon iPF680 User Manual page 466

Menu Settings
GL2 Set- Line &
tings Pen
Manager
Proces-
singOp-
tion
GL2 Set Print
Interface EOP Timer
Setup
TCP/IP
466
Setting Item
Ln wdth correct
Warning
On-the-Fly
Detect img size
IPv4 IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
DNS DNS Dync update
Settings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Description, Instructions
Corrects by using a correction value that specifies the pen
width.
You can configure Black/gray and Color for each group.
The specified range is -20 to +20.
Select On to have any GL2-related warnings displayed.
Selecting On will start printing jobs sooner if you are printing
only HP RTL print jobs and printing would not start until lat-
er. However, images may be incomplete in some cases, so
be sure to check the printing results.
Sets the method of deciding the region to output in order to
print efficiently while avoiding missing images.
If Off is selected and the data contains image range infor-
mation, the image range information is followed.
If Off is selected and the data does not contain image range
information, a size with the maximum roll paper width of the
printer for the width and 1.5 times the maximum roll paper
width for the length is used.
If Command priority is selected and the data contains im-
age range information, the image range information is fol-
lowed.
If Command priority is selected and the data does not con-
tain image range information, the detected minimum image
area is used.
If Detected size is selected, the detected minimum image
area is used.
Print GL2 settings information.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address auto-
matically.
Specify the printer network information when using a static
IP address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated auto-
matically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated auto-
Addr matically.
iPF685
User's Guide