Canon iPF680 User Manual page 502

Configuring the Printer's TCP/IP Network Settings With RemoteUI
When using an IPv6 IP address
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
Note
3
Click Network in the Device Manager menu at left to display the Network page.
4
Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settings
page.
5
Refer to the TCP/IPv6 Settings Items table to complete the settings.
TCP/IPv6 Settings Items
Use IPv6
Use DHCPv6
Use a stateless address
Use a manual address
Primary DNS Server Address
Secondary DNS Server Address
Use the same host name and domain
name as IPv4
Perform dynamic updating of stateful
addresses
Dynamically update the stateless ad-
dress
Dynamically update the manual ad-
502
dress
6
Click OK to display the Network page.
• If a password has been set on the printer, enter the password.
Item
IP Address
Prefix Length
Default Router Ad-
dress
Prefix Length
DNS Host Name
DNS Domain Name
Details
Activate to enable IPv6.
Activate when using a DHCPv6 server to acquire the IP ad-
dress.
Activate when using an IPv6-compatible router to acquire the IP
address.
Activate when configuring the IP address manually.
Enter the printer's IP address.
Enter the IP address prefix length.
Enter the default router address.
Enter the prefix length of the default router address.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Activate when using the same DNS host and domain names as
for IPv4.
Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not
use numbers or - for the first character or - for the last character.
Specify the printer domain name, up to 63 characters. Use sin-
gle-byte letters, numbers, - (hyphens), and . (periods). Do not
use numbers, -, or . for the first character, or - or . for the last
character.
Activate this setting to automatically register the stateful address
with the DNS server.
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Activate this setting to automatically register the manual address
with the DNS server.
iPF685
Default Setting
Off
Off
On
Off
::
0
::
0
::
::
Off
NB-18GBip6xxxxxx
blank
Off
Off
Off
User's Guide