Canon iPF680 User Manual page 464

Hide thumbs Also See for iPF680:
Table of Contents

Advertisement

Menu Settings
GL2 Set-
Quality
tings
Manager
Paper
Manager
464
Line &
Pen
Manager
Setting Item
Print Quality
Input Resolution
Print (Economy)
Paper Source
Margin
Oversize
Conserve Paper
Auto Rotate
Enlarge/Reduce
Print centered
Standard cut
Nesting
Use Nesting
Nesting WaitTime
Cut Lines
Enable merge
Description, Instructions
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
When On is selected, print using less ink.
However, the quality is lower than regular printing.
Select On to conserve ink such as the layout confirmation.
Note that although Print (Economy) is only available when
Fast is selected in Print Quality, it might not be available
depending on the paper type.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the larger of the setting values has priority.
Set the position of the margin relative to the image range.
Choose Off to set the margin inside the image range.
The image may be missing depending on the layout.
Choose On to set the margin outside the image range.
Although the image will not be missing, you should print on
paper larger than the size of the image range plus the mar-
gins.
Conserves paper when printing.
If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, im-
ages may be cut off or the blank paper may be ejected. In
this case, set Auto Rotate to Off.
Enlarge or reduce the image.
Choose Specify scaling to print based on the specified
scaling value.
The specified range is 25 to 400 %.
Choose Fit to paper to print by resizing to fit the paper loa-
ded in the printer.
If Standard cut is On, the printing is resized to fit the stand-
ard paper size.
Print in the center of the paper.
Automatically selects the best standard paper size from the
width of the loaded roll paper and the image size and cuts
the roll paper.
Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on the
roll.
Specify whether to merge or print over colors where lines
overlap.
iPF685
User's Guide

Advertisement

Table of Contents
loading

Table of Contents