Party Mode; Candle Light Mode; Baby Mode 1; Baby Mode 2 - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Refer to P46 for details on selecting a scene menu.

Party mode

a
Use to take pictures at wedding receptions,
indoor parties, etc. Both the people and
the background can be shot with natural
brightness using the flash and slow shutter
speed.
Technique for Party mode
■
• Use the flash.
• Use a tripod and the self-timer for best
results.
• Rotate the zoom lever to Wide (1 ×),
about 1.5 m from the subject.
• The flash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
• You cannot change the white balance
setting.
g

Candle light mode

Use to get the most from the mood created
by candlelight.
Technique for Candle light mode
■
• Don't use the flash.
• Use a tripod and the self-timer for best
results.
• The focus range is 5 cm (Wide)/30 cm
(Tele) to Z.
• The flash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
• You cannot change the white balance
setting.
Advanced-Shooting

Baby mode 1

Baby mode 2

Adjusts the exposure and tone to bring
out the healthy colour of your baby's skin.
The flash will be weaker than normal if you
choose to use it.
• You can set two different birthdays and
names by using [BABY1] and [BABY2].You
can display the set items when playing back
the pictures and stamp them on the recorded
pictures with [TEXT STAMP] (P76).
• You can also use the [PHOTOfunSTUDIO-
viewer-] software on the included CD-ROM
to print your baby's age. (For details, refer
to the separate operating instructions
(PDF file) of the software.)
Age and name display setting
■
CANCEL
1. Select [AGE] or [NAME] using e/r and
press q.
2. Select [SET] using e/r and press
[MENU/SET].
3. When setting [Age]:
Select year / month / day using w/q and
set them using e/r.
Setting [NAME]: Enter the name (Refer
to P75 for details on text entry)
4. Press [MENU/SET]
[AGE] and [NAME] is automatically set
to [ON] and displayed on the screen
when age and name is set. To change
display/none, select [ON] or [OFF] in
[AGE] or [NAME] in step 1 above, and
press [MENU/SET].
• If [ON] is selected when name or
age is not set, the setup screen is
automatically displayed.
• If [AGE] or [NAME] is set to [OFF], the
age or name will not be displayed.
-  -
BABY1
AGE OFF
NAME OFF
SELECT EXIT