Panasonic Lumix DMC-LS80 Operating Instructions Manual page 58

Setting the travel destination area
■
(Perform steps 1, 2 and 3 on P57.)
1 Press e to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
CANCEL SELECT
A
A Depending on the setting, the time at
the travel destination area or the home
area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
2 Press w/q to select the area the travel
destination is in and then press [MENU/
SET] to set.
Adelaide
SELECT
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time difference
from the home area is displayed at the
bottom left of the screen.
• If daylight saving time [
your travel destination, press e. (The
time advances by one hour.) Press e
again to return to the original time.
Advanced-Shooting
SET
CANCEL
SET
] is used in
3 Press [MENU/SET] to close the menu.
SETUP
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
LCD MODE
SELECT
• The icon changes from [ ] to [
setting the travel destination.
• Return the setting to [HOME] when
the vacation is finished by performing
steps 1, 2, 3 and then steps 1 and 2 of
"Setting the home area [HOME]" (P57).
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
• Now when you play photographs taken
while on holiday, the travel icon [
appears.
-  -
OFF
EXIT
] after
]