[Text Stamp] - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Press [ ] to display the [PLAYBACK] mode menu and select the item to set.
Delete the title (for [SINGLE] only)
■
In step 2 when [SINGLE] is selected,
1.
delete all the texts, select [EXIT], and
press [MENU/SET].
2. Press [MENU/SET] twice to close the
menu.
• Registered text can be displayed on the
screen of this unit. (Displayed on slide if
too many texts are input.)
• The name setting of [BABY] or [PET]
mode can be registered by using the
same operation as "Single setting".
However, the name setting and [TITLE
EDIT] cannot be registered at the same
time.
• You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). For details, refer to the
operating instructions (PDF file) of the
software.
Example of text entry
In case of entering [LUMIX]:
1 Move e/r/w/q to move the cursor to
[L] and then press [MENU/SET].
2 Move e/r/w/q to move the cursor to
[U] and then press [MENU/SET].
3 Move e/r/w/q to move the cursor to
[M] and then press [MENU/SET].
4 Move e/r/w/q to move the cursor to
[I] and then press [MENU/SET].
5 Move e/r/w/q to move the cursor to
[X] and then press [MENU/SET].
Advanced-Viewing

[TEXT STAMP]

Stamping the text on your pictures
You can stamp the set text, date and time
of recording, the age and the travel date on
the recorded pictures.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are
resized when you add the text to the
pictures taken with a resolution of more
than [ ].)
Select [
playback menu (P74).
1 Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
PLAYBACK
SELECT
• You cannot add the texts or the date to
the following images.
– Pictures taken when the clock is not set
– Pictures imprinted with the text stamp
– Motion pictures
– Pictures recorded with other equipment
2 Press w/q to choose a picture,
then press r.
TEXT
STAMP
SELECT
SET
• When you have selected [SINGLE] in
step 1, proceed to step 3.
When you have selected [MULTI] in step 1,
repeat step 2 for each pictures (up to 50).
You can set or cancel the picture using r.
After you select the pictures, press [MENU/
SET] and then proceed to step 3-5.
Press [MENU/SET] to close the menu.
-  -
TEXT STAMP] from
CALENDAR
TITLE EDIT
TEXT STAMP SINGLE
RESIZE MULTI
TRIMMING
SET
EXIT
(P74)