Taking Pictures in the Desired Setting
(
Normal Picture Mode)
This mode allows you to take pictures
freely as more options are setup is
available than Intelligent mode [
1
Set the camera to normal picture
mode [
].
•
The [
NORMAL PICTURE] is set as
initial setting when the camera is shipped.
Set the recording/playback switch
1
to rec mode and press [MODE].
Select [
2
and press [MENU/SET].
2
Hold the camera gently with both
hands, keep your arms still at
your side and stand with your
feet shoulder-width apart.
A Flash
B AF assist lamp
3
Aim the AF area D to the point you
want to focus on, and press the
shutter button halfway to focus.
D C
Basic
].
NORMAL PICTURE]
E
F
- -
C The focus indication lights green.
D AF area: white ¦ green
E Aperture value
F Shutter speed
•
The camera beeps twice when the
subject is focused. (When the macro is
not used)
•
The camera can focus between 50 cm
and
. (When the macro is not used)
Z
•
The followings indicate that the subject is
out of focus.
–
Focus indication blinks (green).
–
AF area turns white to red or no AF area.
–
Beeps 4 times.
•
The focus indicator may light even if the
subject is not properly focused if the
subject is out of range.
4
Press the halfway pressed shutter
button fully to take a picture.
Using the flash
■
If the flash is set to AUTO [
AUTO/Red-eye reduction [
will work when you press the shutter button
if the camera determines that the area to
be shot is too dark.
•
You can change the flash settings (P39).
•
When you press the shutter button, the
screen may become bright or dark for
a moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
•
Be careful not to move the camera when
you press the shutter button.
•
Do not cover the photo flash or the AF
assist lamp with your finger or other
objects.
•
Do not touch the lens.
r
] or
s
], the flash