Panasonic Lumix DMC-LS80 Operating Instructions Manual page 40

Available flash settings by recording mode
■
The available flash settings depend on the
recording mode.
(○ : Available, — : Not available, ◎ : Initial
setting)
Û2 It becomes Forced Flash ON [
when the backlight compensation
function is activated.
• The flash setting may change when you
change the recording mode. Change the
flash setting again if necessary.
• Flash settings are retained even if you
switch the camera off. However, scene
mode flash settings return to the factory
settings when you change the scene mode.
Advanced-Shooting
The available flash range to take
■
pictures
ISO sensitivity
AUTO
ISO100
ISO200
ISO400
ISO800
ISO1600
• The available focus range differs
depending on the recording mode.
• When you use the flash when you
have set ISO sensitivity to [AUTO], ISO
sensitivity automatically becomes a
maximum of [ISO1000]. ([ISO400] in the
[BABY1]/[BABY2] modes and [ISO800] in
the [PET] or [SPORTS] modes)
• The edges of the picture may appear
dark if you shoot a very close subject with
the flash while the zoom lever is close to
the W side. Zoom in slightly if this occurs.
• Available flash range varies depending
on ISO sensitivity in [HIGH SENS.].
– W: approximately 115 cm to 15 m
– T: approximately 90 cm to 8.3 m
t ],
- 0 -
Available flash range
30 cm to 5.9 m (Wide)
30 cm to 3.2 m (Tele)
30 cm to 1.8 m (Wide)
30 cm to 1.0 m (Tele)
40 cm to 2.6 m (Wide)
30 cm to 1.4 m (Tele)
60 cm to 3.7 m (Wide)
40 cm to 2.0 m (Tele)
80 cm to 5.3 m (Wide)
60 cm to 2.9 m (Tele)
115 cm to 7.5 m (Wide)
90 cm to 4.1 m (Tele)