Panasonic Lumix DMC-LS80 Operating Instructions Manual page 106

Connecting to a TV, computer or printer
■
Conditions
The picture does not
appear on the television.
The TV screen is
disturbed or displayed
in monochrome.
The display areas on
the TV screen and the
camera's LCD monitor
are different.
Cannot play motion
pictures on a television.
The picture size does
not fit the TV screen.
Cannot upload pictures
to your computer.
The computer does not
recognise the card.
(The built-in memory is
recognised.)
The pictures cannot be
printed with printers.
The sides of printed
images are cut off.
Others
■
Conditions
Unreadable language
was selected by
mistake.
Cannot change the auto
review setting.
Others
Is the camera connected to the TV correctly?
Set the TV to video input mode.
Depending on the TV model, the area display may be smaller
so the picture may be stretched horizontally or vertically and
the top and bottom or left and right of the picture may be cut
off when it is displayed. This is due to the TV specifications
and is not a malfunction.
You cannot play motion pictures if you have inserted the card
into a card slot on a television.
Connect the camera to the television with the included AV
cable and play the pictures on this unit.
Check the [TV ASPECT] setting on this unit.
Check the connections.
Check that the computer has correctly recognised the
camera.
Disconnect the USB connection cable, then insert the card
and reconnect the cable.
Does the printer support PictBridge? You cannot print
pictures with printers which do not support PictBridge.
• If your printer has trimming and border settings, change the
settings so that there is no trimming and no border. (Read
your printer's operating instructions.)
• Some photography shops can handle pictures shot in
the [ j ] aspect ratio. Enquire before sending them for
printing.
Press [MENU/SET], select the [SETUP] menu icon [
then select the [ { ] icon to set the desired language.
Is auto bracket, [SELF PORTRAIT], [HI-SPEED BURST],
burst mode or motion picture mode [
cannot change the auto review setting when using these
modes.
- 10 -
Causes
(P94)
(P23)
Causes
i ] activated? You
(P90)
] and
(P24)